Miller EPIC ULTRA Barrier System

ULTRA Barrier

Tightly engineered steel mesh design; height adjustable.
Maximum post spacing 8-ft. (2.4 m)
Weight 42.77 lbs. (19.4 kg)
M3203

Half ULTRA Barrier

Tightly engineered steel mesh design; height adjustable.
Weight 23.15 lbs. (10.5 kg)
M3204

Safety Post

Length 47.24-in. (1200 mm)
Weight 7.72 lbs. (3.5 kg)
M1102

Adjustable Safety Post

Length 59.06-in. (1500 mm)
Weight 7.72 lbs. (3.5 kg)
M1140

Lumber Beam Base

Used to quickly and easily attach to wood soffit form beams and proprietary forming systems. Provides shuttering and edge protection support. Two (2) models available depending on the size of the form beam: M1401 Top flange thickness 2.36-in. (60 mm); weight 6.17 lbs. (2.8 kg) and M1411 Top flange thickness 1.57-in. (40 mm); weight 6.17 lbs. (2.8 kg).

Jamb Base

Mount to vertical surfaces from slab edges and upstands to walls, shaft sides and reveals. Attaches with two (2) bolts.
Weight 1.10 lb. (0.5 kg)
M1205

Verti-Clamp Base

An attachment that clamps to thin steel sheets up to 5.91-in. (150 mm) thick. Reversible jaws.
Weight 10.14 lbs. (4.6 kg)
M1560

Steel Jaw Clamp Base

Ensures a secure attachment to steel beams and columns. The jaws can be repositioned on the body to increase the offset or to attach in both the horizontal and vertical planes. Accommodates beam sizes 8-in. (203.2 mm) to 16-in. (406.4 mm).
Weight 13.23 lbs. (6.0 kg)
M1555

Ground Support Base

Used for restricting access beyond the line of the barrier, such as excavations, traffic areas or crowd control. Can be anchored or used with counterweight to prevent unintentional movement. Not for fall prevention. 47.05-in. (1195 mm) x 7.64-in. (194 mm);
Weight 6.39 lbs. (2.9 kg)
M1800

Front Base

Mounted vertically and used both as an edge protection and shuttering support. Using a single anchor point, a wide range of applications can be covered. Anchoring methods include form ties, threaded bar, drilled and cast-in sockets.
Weight 3.53 lbs. (1.6 kg)
M1455

Multi-Foot Base

Used for horizontal surface applications, most commonly at the slab edge or for stair applications. The three points of support allow accurate installation on an uneven surface and ensure that the anchor load is correctly controlled. The Multi-Foot Base can be through-fitted using a variety of anchors appropriate to the base material. Hole size diameter 0.71-in. (18 mm) for fastening base.
Weight 2.87 lbs. (1.3 kg)
M1290

Cast-In Tray

Designed to protect the Multi-Foot Base when attached to the structural slab before the finishing concrete is laid. The Cast-In Tray permits concrete of up to 1.97-in. (50 mm) to be poured around the Multi-Foot Base, leaving access for easy removal and even re-use of the Cast-In Tray. After the Multi-Foot Base and Cast-In Tray have been removed from the concrete, the small void can then be filled.
Weight 0.66 lbs. (0.3 kg); polyethylene plastic.
M1291

Steel Clamp Base

A small stable clamp attachment for steel. It can be mounted on the flanges of large steel beams, plate girders, or directly to flat road plates. Grips to steel between 0.39-in. and 1.97-in. (10 mm and 50 mm) thick. It can be used vertically or horizontally.
Weight 4.19 lbs. (1.9 kg)
M1565

Cast-In Sleeve

For use in newly cast concrete. Insert sleeve and allow concrete to cure. Remove the cap and a barrier system can now be installed.
Weight 0.09 lbs. (0.04 kg)
M100359

Multi-Clamp Base

The most versatile attachment covers a wide range of applications. It can clamp horizontally or vertically over a thickness from 0.79-in. (20 mm) to 19.69-in. (500 mm) using the reversible jaw.
Weight 13.23 lbs. (6.0 kg)
M1550

Variable Angle Base

An attachment for pitched or flat roofs, slabs, slab edges, walls, etc. The post socket can be set at five (5) different angles between 0Àö to 90Àö to the base plate.
Weight 6.83 lbs. (3.1 kg)
M1726

Filigree Base

Designed for use with pre-cast concrete slabs. The Filigree Base allows barriers or guardrails to be pre-installed at ground level and lifted into position with the pre-cast unit, avoiding the need to work at height unprotected.

This innovative attachment is easily positioned during the casting process, being placed independently, rotated into position and readily secured to the rebar to prevent movement during the pour. The base will accept loading in any direction and does not require specific orientation.
Weight 1.32 lbs. (0.6 kg)
M1233

CombiStrap Connector

The CombiStrap Connector is a webbing strap with a locking buckle used to connect adjacent barriers.
Weight 0.11 lbs. (0.05 kg)
M100335

ULTRA Barrier Adjuster

The ULTRA Barrier Adjuster allows the barrier to be adjusted in height without having to dismantle the system.
Weight 5.73 lbs. (2.6 kg)
M3224

Multi-Box for Posts and Bases

The Multi-Box is designed for the efficient and safe handling, transport and storage of material. The side hatch can be folded down for access to stacked boxes or for ergonomic handling of material. Can be lifted with chains, slings or forklift.
Weight 132.28 lbs. (60 kg)
Maximum load 2204 lbs. (1000 kg)
M9542

ULTRA Barrier Box

For ease of transport, loading and unloading, the ULTRA Barrier Box holds a maximum of 50 barriers. Can be lifted with chains, slings or forklift.
Weight 101.41 lbs. (46 kg)
M9530

Barrier Hinge

A small device to fasten barriers together. The Barrier Hinge also provides easy access. Corners can be created at angles from 76° to 284° when attached to the end of the barriers, and can also provide angled corners at any position along the barrier.
Weight 1.54 lbs. (0.7 kg)
M3225