BackBiter Tie-Back Lanyards |
|
Tie-Back Safely!
Miller BackBiter offers the ultimate in tie-back safety! The webbing and snap hooks of regular lanyards are not designed to withstand the rigors of tying back. The innovative Miller BackBiter Tie-Back Lanyard with a 5K Snap Hook was designed from top to bottom for tie-back use.
|
 |
FEATURES (click to enlarge)
 |
All-in-one lanyard with SofStop Shock Absorber and cross-arm anchorage connector |
 |
First snap hook with a 5,000 lb. (22kn) gate load capacity from any angle |
| |
Heavy-duty polyester webbing and Cordura® nylon webbing with five times more abrasion resistance |
 |
Available in green or blue webbing for greater chemical resistance |
| Model | Material | Number
of Legs | Harness
Connection | Anchorage
Connection | Standard
Length* |
| 913B/6FTGN |
Webbing |
One |
Locking snap hook |
Locking 5K snap hook |
6' (1.8m) |
| 8798B/6FTGN |
Webbing |
Two |
Locking snap hook |
Locking 5K snap hooks |
6' (1.8m) |
For greater chemical-resistant blue webbing, substitute “BL” for “GN” in the suffix of the corresponding lanyard model number (Ex: 913B/6FTBL).
Note: Locking Snap Hook – 3/4-inch (19mm) gate opening.
Cordura is a registered trademark of E. I. DuPont. |
|
