Miller Twin Turbo Fall Protection System |
New patent-pending Miller Twin Turbo™ D-Ring Connector easily adapts two (2) lightweight Miller TurboLite™ Personal Fall Limiters (PFLs) for continuous 100% tie-off fall protection.
 Replacement for double-legged shock-absorbing lanyards - Innovative design that easily connects to the back D-ring of any fall protection harness Increases worker productivity and versatility with freedom of movement – less restrictive than other units on the market
- Permits TurboLite PFLs to swivel in multiple directions for greater mobility; the swivel action prevents webbing from twisting and binding inside of the unit
- Webbing payout smoothly extends/retracts without interruption
- Easy-to-use and assemble/disassemble
- Adapts to most Miller TurboLite PFL models
- Meets all applicable OSHA 1926.502, 1910.66; ANSI Z359-2007 and A10.32; and CSA Z259.12-01 requirements
|
|
| SKU | Description and Unit Connector | Lanyard End Connector |
Twin Turbo D-Ring Connector
|
| MFLB/ |
Twin Turbo D-Ring Connector |
N/A |
| MFLB-PARTS/ |
D-Ring Connector Parts Kit: Slide Lock Bolt (1), PFL Spacer (2), PFL Retainer Pin (2) |
N/A |
| Twin Turbo System Kits (All kits shipped completely assembled) |
ANSI Z359-2007 Compliant
|
| MFLB-3-Z7/6FT |
Twin Turbo D-Ring Connector & two (2) MFL-3-Z7/6FT TurboLite PFLs |
Locking ANSI Snap Hooks |
| MFLB-4-Z7/6FT |
Twin Turbo D-Ring Connector & two (2) MFL-4-Z7/6FT TurboLite PFLs |
Locking ANSI Rebar Hooks |
| ANSI A10.32 Compliant |
| MFLB-3/6FT |
Twin Turbo D-Ring Connector & two (2) MFL-3/6FT TurboLite PFLs |
Locking Snap Hooks |
| MFLB-4/6FT |
Twin Turbo D-Ring Connector & two (2) MFL-4/6FT TurboLite PFLs |
Locking Rebar Hooks |
| MFLB-11/6FT |
Twin Turbo D-Ring Connector & two (2) MFL-11/6FT TurboLite PFLs w/o carabiners
|
Aluminum Locking Snap Hooks |
| MFLB-12/6FT |
Twin Turbo D-Ring Connector & two (2) MFL-12/6FT TurboLite PFLs w/o carabiners |
Aluminum Locking Rebar Hooks |
|
