Miller Fusion Roof Anchor Post |
 
Permanent or Temporary Solution for Roof Safety
The new versatile, single-point Miller Fusion Roof Anchor Post adapts to a wide range of roof designs with its innovative base plate engineered for temporary or permanent installation to the roof surface.
When properly installed, a dependable fall protection connection is established. Should a fall occur, forces are reduced with its energy-absorbing design to maintain a secure connection to the structure.
The easy-to-install Miller Fusion Roof Anchor Post is designed for quick set-up and does not require roof penetration to sub-surface rafters or trusses.
- Versatile single-point anchor adapts to a wide range of roof designs - With a variety of models available, the Miller Fusion Roof Anchor Post can accommodate most industrial roof designs including standing seam, membrane, built-up, metal sheathing, concrete and wood.
- Attaches to the surface of existing roof structures - Quick, easy installation reduces cost requiring minimal labor and eliminating the need for roof penetration and repair.
- Significantly reduces the fall forces on the roof structure - In the event of a fall, the top of the Miller Fusion Roof Anchor Post reorients with the force in a direct line and activates the patent-pending energy absorber.
- Durable design that withstands the changing outdoor environment - Internal components are constructed of stainless steel. The steel post and base are plated with zinc followed by a premium powder coating for two layers of protection.
- Models for steel decking, concrete and wood can be used on other non-roof structures.
|
 |
In the event of a fall, the Miller Fusion Roof Anchor Post orients in the direction of the force, the built-in, energy-absorbing component activates and the base remains securely attached to the roof surface.
Applications
- Roof inspection and maintenance
- Air conditioning, ventilation fan and solar panel maintenance
- Skylight cleaning
- Debris removal from gutters
- Installation and maintenance of satellite dishes and other communication systems
 |
Miller Fusion Roof Anchor Post adapts to a variety of roof structures
SKU X10001 |
Standing Seam Design
- Aluminum clamping mechanism is designed to pre-install to the base plate and is self centering for easy installation.
- The clamping bolts are tightened from above the plate for easy fastening and inspection.
- Can be used for permanent and temporary installations.
- Three models are available to accommodate standing seam spacing up to 24-in. (610 mm).
|
SKU X10011 |
Metal Sheathing Design
- Designed to attach to metal sheathing with a minimum 24 gauge (0.024-in. [.61 mm]) thickness.
- Hardware kit includes sealing materials to prevent water damage to roof.
|
SKU X10030/X10031 |
Membrane/Built-up Design
- Easy-to-install toggle kit fastens through membrane, insulation and into metal sheathing, wood sheathing or concrete.
- Models available for built-up roof thicknesses accommodate up to 10.5-in. (267 mm).
|
SKU X10040 |
Wood Design
- Includes lag screw kit.
- Installs into plywood with minimum thickness of 5/8-in. (15.9 mm) CDX.
- Designed for temporary installation only.
|
SKU X10050 |
Concrete Decking Design
- Includes concrete expansion anchor kit.
- Installs into concrete decking with minimum thickness of 6.5-in. (165 mm) and minimum concrete compressive strength of 3000 PSI (20.7 MPa).
|
SKU X10020 |
Multi-Purpose Metal Sheathing, Wood and Concrete Design
- This multi-purpose post uses the same base as models X10011, X10040 and X10050.
- Miller specified hardware must be purchased for this base. (This model does not include hardware.)
|
| SKU | Description | Designed to Accommodate |
| STANDING SEAM ROOFING – Includes post with base and standing seam clamping assembly kit |
| X10000 |
Small base |
Standing seam spacing from 11.75-in. (298 mm) to 17-in. (432 mm) |
| X10001 |
Large base |
Standing seam spacing from 11.75-in. (298 mm) to 21.25-in. (540 mm) |
| X10002 |
Large base & extension bars |
Standing seam spacing from 11.75-in. (298 mm) to 24-in. (610 mm) |
| METAL SHEATHING ROOFING – Includes post with base and rivet kit with sealing washers and mastic tape |
| X10010 |
Small base |
Metal sheathing w/minimum thickness of 24 gauge (0.024-in. [0.61 mm]) |
| X10011 |
Large base |
Metal sheathing w/minimum thickness of 24 gauge (0.024-in. [0.61 mm]). Trapezoidal spacing of 8-in. (203 mm) to 20-in. (508 mm) in one-inch (25.4 mm) increments. |
| MEMBRANE/BUILT-UP ROOFING – Includes post with base and toggle bolt kit |
| X10030 |
Up to 5.5-in. (140 mm) thickness |
Fastens through membrane, insulation & into metal sheathing, wood sheathing or concrete with a combined thickness of up to 5.5-in. (140 mm) |
| X10031 |
> 5.5-in. (140 mm) & up to 10.5-in. (267 mm) thickness |
Fastens through membrane, insulation & into metal sheathing, wood sheathing or concrete with a combined thickness of > 5.5-in. (140 mm) up to 10.5-in. (267 mm) |
| WOOD SHEATHING (temporary installations only) – Includes post with base and lag screw kit |
| X10040 |
Wood sheathing |
Plywood with minimum thickness of 5/8-in. (15.9 mm) CDX |
| CONCRETE ROOFING – Includes post with base and concrete expansion bolt anchor kit |
| X10050 |
Concrete |
Concrete decking with minimum thickness of 6.5-in. (165 mm) & minimum concrete compressive strength of 3000 PSI (20.7 MPa) |
| MULTI-PURPOSE METAL SHEATHING, WOOD AND CONCRETE ROOFING (no hardware included) – Includes post with base. Hardware selection is based on the application. See instruction manual for hardware specifications. |
| X10020 |
Metal sheathing, wood or concrete |
- Metal sheathing w/minimum thickness of 24 gauge (0.024 in. [0.61 mm])
- Trapezoidal spacing of 8-in. (203 mm) to 20-in. (508 mm) in one-inch (25.4 mm) increments.
- Plywood with minimum thickness of 5/8-in. (15.9 mm) CDX
- Concrete decking with minimum thickness of 6.5-in. (165 mm) & minimum concrete compressive strength of 3000 PSI (20.7 MPa)
|
| Meets or exceeds all applicable industry standards including OSHA, ANSI A10.32 and Z359.1-2007. |
|
