Miller Fusion™ Roof Anchor Post

PERMANENT OR TEMPORARY SOLUTION
The versatile Miller Fusion™ Roof Anchor Post single-point anchor adapts to a wide range of roof designs including standing seam, membrane/built-up, metal sheathing, concrete and wood. The innovative base plate is designed for quick set-up with no need for roof surface penetration.

Features

Dependable Connection
Should a fall occur, forces are reduced with its energy-absorbing design to maintain a secure connection to the structure.

Easy Installation
A quick and easy installation reduces the set-up cost requiring minimal labor and eliminating the need for roof penetration and repair.

More Less

Features

  • Significantly reduces the fall forces on the roof structure – In the event of a fall, the top of the Miller Fusion Roof Anchor Post reorients with the force in a direct line and activates the patent-pending energy absorber.
  • Durable design that withstands the changing outdoor environment – Internal components are made of stainless steel
  • Double coating for extra protection – The steel post and base are plated with zinc followed by a premium powder coating for two layers of protection
  • Versatile single-point anchor adapts to a wide range of roof designs
  • Models for steel decking, concrete and wood can be used on other non-roof structure

Applications

  • Roof inspection and maintenance
  • Air conditioning, ventilation fan and solar panel maintenance
  • Skylight cleaning
  • Debris removal from gutters
  • Installation and maintenance of satellite dishes and other communication systems

Miller Fusion Roof Anchor Post adapts to a variety of roof structures:

Standing Seam Design

  • Aluminum clamping mechanism is designed to pre-install to the base plate and is self centering for easy installation
  • The clamping bolts are tightened from above the plate for easy fastening and inspection
  • Can be used for permanent and temporary installations
  • Three models are available to accommodate standing seam spacing up to 24-in. (610 mm)

Metal Sheathing Design

  • Designed to attach to metal sheathing with a minimum 24 gauge (0.024-in. [.61 mm]) thickness
  • Hardware kit includes sealing materials to prevent water damage to roof

Membrane/Built-up Design

  • Easy-to-install toggle kit fastens through membrane, insulation and into metal sheathing, wood sheathing or concrete
  • Models available for built-up roof thicknesses accommodate up to 10.5-in. (267 mm)

Wood Design

  • Installs into plywood with minimum thickness of 5/8-in. (15.9 mm) CDX
  • Includes lag screw kit
  • Designed for temporary installation only

Concrete Decking Design

  • Installs into concrete decking with minimum thickness of 6.5-in. (165 mm) and minimum concrete compressive strength of 3000 PSI (20.7 MPa)
  • Includes concrete expansion anchor kit

Multi-Purpose Metal Sheathing, Wood and Concrete Design

  • This multi-purpose post uses the same base as models X10011, X10040 and X10050
  • Miller specified hardware must be purchased for this base. (This model does not include hardware)

Literature and Documents

Standing Seam Roofing

SKU Description Designed To Accommodate
X10000 Small Base with Post and Standing Seam Clamping Assembly Kit Standing seam spacing from 11.75-in.(298 mm)to 17-in.(432 mm)
X10001 Large Base with Post and Standing Seam Clamping Assembly Kit Standing seam spacing from 11.75-in.(298 mm)to 21.25-in.(540 mm)
X10002 Large Base, Post, Standing Seam Clamping Assembly Kit & Extension Bars Standing seam spacing from 11.75-in.(298 mm)to 24-in.(610 mm)

Metal Sheathing Roofing

SKU Description Designed To Accommodate
X10010 Small Base with Post, Rivet Kit with sealing washers and mastic tape Metal sheathing w/minimum thickness of 24 gauge(0.024-in. [0.61 mm])
X10011 Large Base with Post, Rivet Kit with sealing washers and mastic tape Metal sheathing w/minimum thickness of 24 gauge(0.024-in. [0.61 mm]). Trapezoidal spacing of 8-in.(203 mm)to 20-in.(508 mm)in one-inch(25.4 mm)increments.

Membrane/Built-Up Roofing

SKU Description Designed To Accommodate
X10030 Post with base and toggle bolt kit Fastens through membrane, insulation & into metal sheathing, wood sheathing or concrete with a combined thickness of up to 5.5-in.(140 mm)
X10031 Post with base and toggle bolt kit Fastens through membrane, insulation & into metal sheathing, wood sheathing or concrete with a combined thickness of > 5.5-in.(140 mm)up to 10.5-in.(267 mm)

Wood Sheathing (temporary installations only)

SKU Description Designed To Accommodate
X10040 Post with base and lag screw kit Plywood with minimum thickness of 5/8-in.(15.9 mm)CDX

Concrete Roofing

SKU Description Designed To Accommodate
X10050 Post with base and concrete expansion bolt anchor kit Concrete decking with minimum thickness of 6.5-in.(165 mm)& minimum concrete compressive strength of 3000 PSI(20.7 MPa)

Multi-Purpose Metal Sheathing, Wood, and Concrete Roofing

SKU Description Designed To Accommodate
X10020 Post with base (no hardware included). Hardware selection is based on the application - refer to instruction manual for specifications Metal sheathing w/minimum thickness of 24 gauge (0.024 in.). Trapezoidal spacing of 8-in. to 20-in. (20 cm - 50.8 cm) in one-inchincrements. Plywood with minimum thickness 5/8-in. (15.9 mm) CDX. Concrete decking with minimum thickness of 6.5-in. & minimum concrete compressive strength of 3000 PSI (20.7 MPa)