Fall Protection Equipment Inspection Training

Cost per participant: $525

Open enrollment class. Also available in Spanish.

Duration :8-hour Course | Time: 8 a.m. - 5 p.m.

The 8-hour Fall Protection Equipment Inspection Course (formerly Competent Inspection) is a course designed for a tool crib worker that needs to inspect the equipment prior to issuing to the users, but does not have the level of responsibility the competent person does. The training provides experience, methodology and in-depth look at all standards (ANSI & CSA) and regulations (OSHA) covering inspection of personal fall arrest systems.

– Or –

Newly trained "competent person" who is responsible for the annual inspecting of personal fall arrest systems. The newly trained competent person may need additional hands on inspection experience to broaden their inspection education.

NOTE: This 8-hr Fall Protection Equipment Inspection course in conjunction with the 16-hr Fall Prevention & Fall Protection Competent Person course complies with the ANSI/ASSE Z359.2 code. (EM 385-1-1, updated March 2015) (24-hours)

REGISTER NOW

855-565-6722 | HoneywellSafetyTraining@Honeywell.com

PROGRAM TOPICS

  • Competent Inspector Definition and Requirements
  • Inspection Pass/Fail Criteria
    - American National Standards Institute (ANSI)
    - Canadian Standards Association (CSA)
    - Occupational Safety and Health Administration (OSHA)
  • Inspection Procedures
  • Hands-On Practical Exercises

WHO SHOULD ATTEND

All personnel interested in additional experience inspecting personal fall protection equipment. As stated above, this is excellent training for a tool crib worker (pre-use inspection) or a newly trained competent person (annual inspections) who needs additional hands on inspection experience.

CLASS SIZE

24

COURSE MATERIALS

Reference materials including compilation of standards covering inspection, schematics of personal fall arrest systems, checklists, inspection program guidelines and certificate of compliance.

REGISTER NOW