Quick Links

Anchorage Connectors

Anchorage ConnectorsThe third component of a personal fall arrest system is the Anchorage/Anchorage Connector. An anchorage, commonly referred to as a tie-off point, may be an I-beam, column, rebar, scaffolding, or other structural member.

An anchorage connector is used to join the connecting device to the anchorage when a direct connection does not exist. It is important to select the proper anchorage/anchorage connector for ultimate safety. Anchorages and anchorage connectors must be easily accessible, capable of supporting 5,000 lbs. of force per worker, and they must be located high enough for a worker to avoid contact with a lower level should a fall occur.

Miller offers a variety of convenient 5,000 lb. rated anchorage connectors for every application. All Miller anchorage connectors meet applicable OSHA, ANSI and CSA standards for compliance and safety.

Temporary Anchorage Connectors

Temporary Anchorage Connectors

Permanent Anchorage Connectors

Permanent Anchorage Connectors

Roofing Products

Roofing Products

     

 

 

Ask the Expert...Ask Miller.
News 4 You
Fall Clearance Calculator
Honeywell Road Show
safety-institute-button.jpg
CSA Z259.12-11 Fall Protection Standard
Home arrow Fall Protection Products arrow Personal Fall Protection Products arrow Anchorage Connectors
Miller Fall Protection Banner
Technical Service 800/873-5242 +1 814/432-2118
Loading
Region: North America
Generated in 0.293 Seconds