Quick Links

Miller Fusion Roof Anchor Post

Are you meeting the New OSHA Residential Construction Regulation?Miller Fusion Roof Anchor Post

Permanent or Temporary Solution for Roof Safety

The new versatile, single-point Miller Fusion Roof Anchor Post adapts to a wide range of roof designs with its innovative base plate engineered for temporary or permanent installation to the roof surface.

When properly installed, a dependable fall protection connection is established. Should a fall occur, forces are reduced with its energy-absorbing design to maintain a secure connection to the structure.

The easy-to-install Miller Fusion Roof Anchor Post is designed for quick set-up and does not require roof penetration to sub-surface rafters or trusses.

  • Versatile single-point anchor adapts to a wide range of roof designs - With a variety of models available, the Miller Fusion Roof Anchor Post can accommodate most industrial roof designs including standing seam, membrane, built-up, metal sheathing, concrete and wood.
  • Attaches to the surface of existing roof structures - Quick, easy installation reduces cost requiring minimal labor and eliminating the need for roof penetration and repair.
  • Significantly reduces the fall forces on the roof structure - In the event of a fall, the top of the Miller Fusion Roof Anchor Post reorients with the force in a direct line and activates the patent-pending energy absorber.
  • Durable design that withstands the changing outdoor environment - Internal components are constructed of stainless steel. The steel post and base are plated with zinc followed by a premium powder coating for two layers of protection.
  • Models for steel decking, concrete and wood can be used on other non-roof structures.

360° Protection

Miller Fusion Roof Anchor Post

In the event of a fall, the Miller Fusion Roof Anchor Post orients in the direction of the force, the built-in, energy-absorbing component activates and the base remains securely attached to the roof surface.

Applications

  • Roof inspection and maintenance
  • Air conditioning, ventilation fan and solar panel maintenance
  • Skylight cleaning
  • Debris removal from gutters
  • Installation and maintenance of satellite dishes and other communication systems

Miller Fusion Roof Anchor Post Application

Miller Fusion Roof Anchor Post adapts to a variety of roof structures

Standing Seam Design - SKU X10001
SKU X10001
Standing Seam Design
  • Aluminum clamping mechanism is designed to pre-install to the base plate and is self centering for easy installation.
  • The clamping bolts are tightened from above the plate for easy fastening and inspection.
  • Can be used for permanent and temporary installations.
  • Three models are available to accommodate standing seam spacing up to 24-in. (610 mm).
Metal Sheathing Design - SKU X10011
SKU X10011
Metal Sheathing Design
  • Designed to attach to metal sheathing with a minimum 24 gauge (0.024-in. [.61 mm]) thickness.
  • Hardware kit includes sealing materials to prevent water damage to roof.
Membrane/Built-up Design - SKU X10030/X10031
SKU X10030/X10031
Membrane/Built-up Design
  • Easy-to-install toggle kit fastens through membrane, insulation and into metal sheathing, wood sheathing or concrete.
  • Models available for built-up roof thicknesses accommodate up to 10.5-in. (267 mm).
Wood Design - SKU X10040
SKU X10040
Wood Design
  • Includes lag screw kit.
  • Installs into plywood with minimum thickness of 5/8-in. (15.9 mm) CDX.
  • Designed for temporary installation only.
Concrete Decking Design - SKU X10050
SKU X10050
Concrete Decking Design
  • Includes concrete expansion anchor kit.
  • Installs into concrete decking with minimum thickness of 6.5-in. (165 mm) and minimum concrete compressive strength of 3000 PSI (20.7 MPa).
Multi-Purpose Metal Sheathing, Wood and Concrete Design - SKU X10020
SKU X10020
Multi-Purpose Metal Sheathing, Wood and Concrete Design
  • This multi-purpose post uses the same base as models X10011, X10040 and X10050.
  • Miller specified hardware must be purchased for this base. (This model does not include hardware.)

 

SKUDescriptionDesigned to Accommodate
STANDING SEAM ROOFING – Includes post with base and standing seam clamping assembly kit
X10000 Small base Standing seam spacing from 11.75-in. (298 mm) to 17-in. (432 mm)
X10001 Large base Standing seam spacing from 11.75-in. (298 mm) to 21.25-in. (540 mm)
X10002 Large base & extension bars Standing seam spacing from 11.75-in. (298 mm) to 24-in. (610 mm)
METAL SHEATHING ROOFING – Includes post with base and rivet kit with sealing washers and mastic tape
X10010 Small base Metal sheathing w/minimum thickness of 24 gauge (0.024-in. [0.61 mm])
X10011 Large base Metal sheathing w/minimum thickness of 24 gauge (0.024-in. [0.61 mm]). Trapezoidal spacing of 8-in. (203 mm) to 20-in. (508 mm) in one-inch (25.4 mm) increments.
MEMBRANE/BUILT-UP ROOFING – Includes post with base and toggle bolt kit
X10030 Up to 5.5-in. (140 mm) thickness Fastens through membrane, insulation & into metal sheathing, wood sheathing or concrete with a combined thickness of up to 5.5-in. (140 mm)
X10031 > 5.5-in. (140 mm) & up to 10.5-in. (267 mm) thickness Fastens through membrane, insulation & into metal sheathing, wood sheathing or concrete with a combined thickness of > 5.5-in. (140 mm) up to 10.5-in. (267 mm)
WOOD SHEATHING (temporary installations only) – Includes post with base and lag screw kit
X10040 Wood sheathing Plywood with minimum thickness of 5/8-in. (15.9 mm) CDX
CONCRETE ROOFING – Includes post with base and concrete expansion bolt anchor kit
X10050 Concrete Concrete decking with minimum thickness of 6.5-in. (165 mm) & minimum concrete compressive strength of 3000 PSI (20.7 MPa)
MULTI-PURPOSE METAL SHEATHING, WOOD AND CONCRETE ROOFING (no hardware included) – Includes post with base. Hardware selection is based on the application. See instruction manual for hardware specifications.
X10020 Metal sheathing, wood or concrete
  • Metal sheathing w/minimum thickness of 24 gauge (0.024 in. [0.61 mm])
  • Trapezoidal spacing of 8-in. (203 mm) to 20-in. (508 mm) in one-inch (25.4 mm) increments.
  • Plywood with minimum thickness of 5/8-in. (15.9 mm) CDX
  • Concrete decking with minimum thickness of 6.5-in. (165 mm) & minimum concrete compressive strength of 3000 PSI (20.7 MPa)
Meets or exceeds all applicable industry standards including OSHA, ANSI A10.32 and Z359.1-2007.

Interactive Catalog Now Available!

Easily view the digital version of our "Gravity Kills, Defy It!" 114-page product catalog.

Click Here to View Catalog

Ask the Expert...Ask Miller.
News 4 You
Fall Clearance Calculator
Honeywell Road Show
safety-institute-button.jpg
CSA Z259.12-11 Fall Protection Standard
Home arrow Fall Protection Products arrow Personal Fall Protection Products arrow Roofing Products arrow Fusion Roof Anchor Post
Miller Fall Protection Banner
Technical Service 800/873-5242 +1 814/432-2118
Loading
Region: North America
Generated in 0.240 Seconds